| |
S. NO |
CATEGORY |
OLD FILM TYPE |
 |
NEW FILM TYPE |
|
THICKNESS (MICRONS) |
PROPERTIES |
APPLICATIONS |
REF.NO. QAD UFLD S/07 |
VIEW APPLICATION |
1 |
Flexible Packaging Films |
FP |
|
10,11,12,15, 19,23,36,50 |
| • |
Excellent clarity. |
| • |
The film is available in two |
| |
types, Viz., |
| |
1. Plain (both side untreated (UT)
2. One side Corona treated film (CT),
Corona treatment is available inside or
outside of the roll. |
| |
|
|
Flexible packaging, specially designed for FFS machines |
F1/1 |
 |
2 |
Optically clear |
CLR |
|
12,23,36 |
| • |
This grade of films are low |
| |
haze films with high clarity & transparency. |
| • |
They are available in one |
| |
side pre-treated form (Chemical/Corona) |
|
Printing & Lamination Metallization, Embossing Holograms |
F2/1 |
 |
3 |
Extra Clear |
XLR |
|
12,23,30,36,50 |
| • |
This grade of films are very |
| |
low haze films with high clarity & transparency. |
| • |
They are available in corona |
| |
treated or untreated form. |
|
Printing & Lamination Metallization, Embossing Holograms |
F3/2 |
 |
4 |
Coated Films for Conversion (Improved ink adhesion & retort) |
AUU |
|
10,12,23 |
| • |
This film is having all the |
| |
desired properties as mentioned under FPAP. |
| • |
The primer coating done on |
| |
one side of the film provides excellent anchorage to inks & adhesives hence increases the bond strength of laminate. |
| • |
The film is suitable for hot fill |
| |
applications, pasteurization, sterilization or retort. |
| |
|
|
This grade of film is used for flexible packaging, specially Designed for FFS
machines.Because of the primer coating on one side, this grade of the film can be used for wide range of solvents and water-based
inks. Excellent application in retort & pasteurization |
F4/1 |
 |
5 |
AUT |
|
10,12,23 |
| • |
This is similar to F-AUU film |
| |
with corona treatment on the other side for improved bond strength with the other substrate. |
| • |
The film is recommended for |
| |
hot fill applications, pasteurization, sterilization or retort. |
|
This grade of film is used for flexible
packaging, specially Designed for FFS
machines.Because of the primer coating on
one side, this grade of the film can be used
for wide range of solvents and water-based
inks. Excellent application in retort &
pasteurization. The other side with corona
treatment gives better adhesion for vacuum
deposited metallization. |
F-5/1 |
 |
6 |
FB |
|
10,12,23 |
| • |
This film is having all the |
| |
desired properties as mentioned under FPAP. |
| • |
The primer coating done on |
| |
one side of the film provides better
anchorage to inks & adhesives and
improves metal adhesion.The film is
suitable for pasteurization applications. |
| |
|
|
This grade of film is used for flexible
packaging, specially Designed for FFS
machines. Because of the primer coating on
one side, this grade of the film can be used
for wide range of solvent Based inks.
Excellent application in retort & sterilization. |
F6/1 |
 |
7 |
ATT |
|
9,10,12,23 |
| • |
This is similar to F-ATU film |
| |
with corona treatment on the other side for improved bond strength with the other substrate. |
| • |
The film is suitable for |
| |
pasteurization applications. |
|
Flexible packaging, specially designed for
FFS machines.The special primer coating
side can be used for wide range of solvents
and water based inks.The other side with
corona treatment gives better adhesion for
vacuum deposited metallization. |
F7/1 |
 |
8 |
Coated Films for Conversion (Improved ink & metal adhesion) |
FC |
|
10,12,23 |
| • |
This film is having all the |
| |
desired properties as mentioned under FPAP. |
| • |
The primer coating done on |
| |
one side of the film provides excellent anchorage of metal, various inks & adhesives hence increases the bond strength of laminate. |
| • |
The film is not recommended |
| |
for hot fill applications, pasteurization, sterilization or retort. |
|
Flexible packaging, specially designed for FFS machines. Because of the primer coating on one side, this grade of the film can be used for wide range of solvents and water-based inks. |
F8/1 |
 |
9 |
FF |
|
10,12,15,19, 23 |
| • |
This is similar to F-CHE film |
| |
with corona treatment on the other side for improved bond strength with the other substrate. |
| • |
The film is not recommended |
| |
for hot fill applications, pasteurization, sterilization or retort. |
|
Flexible packaging, specially designed for
FFS machines.The primer coating side
can be used for wide range of solvents
and water based inks. The other side with
corona treatment gives better adhesion
for vacuum deposited metallization. This
grade of film is ideal for one side
metallization and other side printing
(board lamination.With metallized side
and surface printing). |
F9/1 |
 |
10 |
Document Lamination |
FL |
|
10,11,12,15, 19,23,36,50 |
| • |
It has balance shrinkage |
| |
|
|
This grade of film is used for thermal lamination such as document lamination. |
F10/1 |
 |
11 |
Matt film |
FX |
|
12,19,23 |
| • |
This grade of film contain a |
| |
special additive to give matt surface |
| |
|
| |
|
|
Flexible packaging, specially designed for FFS machines. This grade of film have improved shrinkage properties at elevated temperatures |
F11/1 |
 |
12 |
Coated Matt Film |
- |
|
12,19,23 |
| • |
One side chemical coated |
| |
matt film for
improved ink adhesion & laminate
bond strength. |
| |
|
|
Board lamination, thermal lamination,
label & conversion applications |
F22/1 |
|
13 |
Electrical Grade |
FE |
|
12,15,19,23, 36,50 |
| • |
This grade of film is having |
| |
excellent dielectric properties such as high breakdown voltage, low dielectric Loss factor & high electrical resistivity. |
| |
|
|
This grade of film is used in electrical insulation such as motor winding, cable overwraps, leatheroid lamination, electrical insulation tape. |
F12/1 |
 |
14 |
Adhesive tape film |
FD |
|
10,12,23 |
| • |
Specially designed to meet |
| |
Stringent requirement of adhesive coating |
| |
|
|
Adhesive tape |
F13/1 |
 |
15 |
Yarn grade |
FY |
|
12,23 |
| • |
This grade of film is having |
| |
Excellent clarity, transparency & thermal stability at elevated temperatures (190°C) makes this product ideal for metallic yarn processsing. |
| • |
Because of excellent clarity |
| |
& transparency, when this film is metallized & coated with colored laquer, it gives good luster to the end product. |
|
Metallic yarn (can be directly used for plain yarn) & also can be used as synthetic jari (yarn) after metallization & lacquering. |
F14/1 |
 |
16 |
Hot Stamping Grade |
FH |
|
12,15,19,23, 45,50,55 |
| • |
This grade of film has |
| |
excellent transparency & clarity. |
| • |
It has good thermal stability |
| |
at elevated temperature (190°C) |
|
This grade of film is ideal as a transfer foil to transfer the design either on paper, textiles or plastics. |
F15/1 |
 |
17 |
Lidding film |
FI |
|
12,23,36 |
| • |
It has Improved tensile |
| |
strength and elongation properties |
|
This grade of film is used for Lidding application in Dairy products |
F16/1 |
 |
18 |
Yarn coated films for Specialized Applications |
CCY |
|
12,23 |
| • |
Specially designed with the |
| |
feature that it is primer coated on one side and corona treated on other side with improved Shrinkage at elevated temperature |
| |
|
|
Flexible packaging, specially designed for FFS machines.This grade of film have improved shrinkage properties at elevated temperatures. |
F17/1 |
 |
19 |
CHY |
|
12,23 |
| • |
This film is having all the |
| |
desired properties as mentioned under FYRN. |
| • |
The film is one side |
| |
chemically Coated film. |
|
Flexible packaging, specially
Designed chemi coated film with
excellent shrinkage properties at
elevated temperatures for
Speciallised applications. |
F18/1 |
 |
20 |
Metallizing grade |
FM |
|
10,11,12,15, 19,23,36,50 |
| • |
This is a transparent film |
| |
with excellent clarity to give good gloss after metallization. |
| • |
The film is available in two |
| |
types, viz.,
1.Plain (both side untreated (UT)
2.One side Corona treated film (CT), the metallization on the corona treated side gives good adhesion. |
|
This grade of film is used in vacuum
metallization & for further usage in
flexible packaging as a barrier
substrate. |
F19/1 |
 |
21 |
Release film |
FR |
|
19,23,36,50 |
| • |
This is a transparent film |
| |
with Excellent release properties |
| |
|
|
This grade of film is used in fiberreinforced plastics and Glass reinforced plastics. |
F20/1 |
 |
22 |
Silicon Coatable film |
FU |
|
19,23,30,36, 50 |
| • |
This grade of film has high |
| |
strength & durability, optical clarity and good thermal dimensional stability |
| |
|
| |
|
|
Silicon coating applications |
F21/1 |
 |
23 |
White opaque packaging film |
- |
|
23,26,50 |
| • |
F-WAP is a white polyester |
| |
film with exellent opacity. |
| • |
Film has a wide range of |
| |
applications due to its excellent combination of optical, physical, mechanical and thermal properties. |
|
This film is suitable for jobs where
white backing is required like lids,
labels etc.mostly surface printed jobs |
F23/1 |
 |
24 |
White opaque chemically coated film |
- |
|
23,36,50 |
| • |
This grade is a white |
| |
polyester film with exellent opacity. |
| • |
The film is one side |
| |
chemically treated for better ink
anchorage to solvent based inks. |
|
This film is suitable for jobs where
white backing is required like lids,
labels etc.mostly surface printed jobs |
F24/1 |
 |
25 |
Easy stackale film |
- |
|
12 |
| • |
This grade have special |
| |
functional
surface so as to provide easy stacking
of bags and restrict the slipage while
stacking. |
| |
|
| |
|
|
This film helps during
palletizing,storage and stacking of
bags in supermarket. |
F25/1 |
 |
|
|